Appendix A: Faq - TP-Link TL-WR841HP User Manual

Appendix A: FAQ

1. How do I configure the router to access Internet by ADSL users?
1) First, configure the ADSL Modem configured in RFC1483 bridge model.
2) Connect the Ethernet cable from your ADSL Modem to the Internet port on the router.
The telephone cord plugs into the Line port of the ADSL Modem.
Login to the router, Go to "Advanced→Network→WAN". On the WAN page, select
3)
"PPPoE/Russia PPPoE" for WAN Connection Type. Type user name in the "User
Name" field and password in the "Password" field, type password in the "Confirm
Password" field again, finish by clicking "Connect".
If your ADSL lease is in "pay-according-time" mode, select "Connect on Demand" or
4)
"Connect Manually" for Internet connection mode. Type an appropriate number for
"Max Idle Time" to avoid wasting paid time. Otherwise, you can select "Connect
Automatically" for Internet connection mode.

Note:
1) Sometimes the connection cannot be disconnected although you specify a time to
Max Idle Time, since some applications is visiting the Internet continually in the
background.
2) If you are a Cable user, please configure the router following the above steps.
2. How do I configure the router to access Internet by Ethernet users?
Login to the router, Go to "Advanced→Network→WAN". On the WAN page, select
1)
"Dynamic IP" for "WAN Connection Type", finish by clicking "Save".
TL-WR841HP 300Mbps High Power Wireless N Router
-157-