TP-Link TL-WR841HP User Manual page 121

To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled.
Click the Disable All button to make all entries disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page.
Click the Previous button to return to the previous page.
4.3.3.4. Wireless Advanced
Go to "Setting→Wireless→Wireless Advanced", and then you can configure the advanced
settings of your wireless network.

Transmit Power - Here you can specify the transmit power of Router. You can select
100%, 75% or 50% which you would like. 100% is the default setting and is
recommended.

Note:
Select the Transmit Power as you need. 100% gives you the best coverage, but it may be
restricted in your country. Please make sure that it is allowed by consulting your ISP.

Beacon Interval - Enter a value between 40-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the Router to synchronize a wireless network.
Beacon Interval value determines the time interval of the beacons. The default value is
100.
TL-WR841HP 300Mbps High Power Wireless N Router
-112-