TP-Link TL-WR841HP User Manual page 99

are set up improperly. You should contact your ISP to get DNS server addresses.
LAN Setup

Address Autoconfiguration Type - RADVD (Router Advertisement Daemon) and
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.

Start IPv6 Address - The start address of the DHCPv6 pool for LAN DHCPv6 Server.

End IPv6 Address - The end address of the DHCPv6 pool for LAN DHCPv6 Server.

Release Time - The Release Time is the length of time a network user will be allowed
to keep connecting to the Router with the current DHCPv6 Address. Enter the amount
of time, in seconds, that the DHCPv6 address will be "leased". The time range is
1~691200 seconds. The default value is 86400 seconds.

Site Prefix Configuration Type - The type of IPv6 address prefix.

Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
delegate it to the LAN.

Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
ISP to get more information before you configure them.
Site Prefix/ Site Prefix Length: - Configure the Site Prefix and Site Prefix Length.
Please contact your ISP before configuration.

LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.
TL-WR841HP 300Mbps High Power Wireless N Router
-90-