TP-Link TL-WR841HP User Manual page 36

 User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an

extra Connection type such as Dynamic/Static IP to connect to a local area network, then
you can check the radio button of Dynamic/Static IP to activate this secondary connection.
 Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
 Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.
 Static IP - You can check this radio button to use Static IP as the secondary
connection to connect to the local area network provided by ISP.
 Connect on Demand - In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again. If you want your Internet connection keeps
active all the time, please enter "0" in the Max Idle Time field. Otherwise, enter the number
of minutes you want to have elapsed before your Internet access disconnects.
 Connect Automatically - The connection can be re-established automatically when it was
down.
 Time-based Connecting - The connection will only be established in the period from the
start time to the end time (both are in HH:MM format).
TL-WR841HP 300Mbps High Power Wireless N Router
-27-