Advanced Security - TP-Link Archer C50 User Manual

Chapter 4
• ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG
allows customized Network Address Translation (NAT) traversal filters to be plugged
into the gateway to support address and port translation for certain application layer
"control/data" protocols such as FTP, TFTP, H323 etc.
• FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep
the default Enable.
• TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep
the default Enable.
• H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT,
keep the default
• SIP ALG - To allow some multimedia clients to communicate across NAT, click
Enable.
• RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable.
3. Click Save.

4. 10. 2. Advanced Security

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Security >
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
• DoS Protection - Denial of Service protection. Select Enable or Disable to enable or
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note: Dos Protection will take effect only when the Statistics in
• Enable ICMP-Flood Attack Filtering
Enable.
Advanced Security, and you can protect the router from being
-Check the box to enable or disable this function.
Configure the Router in Wireless Router Mode
System Tool > Statistics is enabled.
41