TP-Link TL-WR841HP User Manual page 151


Current Status - The connected wireless station's running status, one of
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected.

Received Packets - Packets received by the station.

Sent Packets - Packets sent by the station.

Configure - The button is used for loading the item to the Wireless MAC Filtering list.
Deny - if the Wireless MAC Filtering function enable, deny the station to access.
Allow - if the Wireless MAC Filtering function enable, allow the station to access.
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.
5.3.3.7. Throughput Monitor
Go to "Setting→Wireless→Throughput Monitor", and then you can see watch wireless
throughput information.

Rate - The Throughput unit.
TL-WR841HP 300Mbps High Power Wireless N Router
-142-
STA-AUTH /