Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
How to enable DMZ Host: Log in to the router, Go to "Advanced→Forwarding→
4)
DMZ". On the "DMZ" page, click Enable radio button and type your IP address into the
"DMZ Host IP Address" field, using 192.168.0.169 as an example, remember to click
the Save button.
How to enable H323 ALG: Log in to the router, Go to "Advanced→Security→Basic
5)
Security". On the "Basic Security" page, check the Enable radio button next to H323
ALG. Remember to click the Save button.
TL-WR841HP
300Mbps High Power Wireless N Router
-159-