The Front Panel; Panel Layout - TP-Link TL-WR841HP User Manual

1.4 Panel Layout

1.4.1 The Front Panel


RE button: The button for the Range Extender mode. Press and hold it for about 3
seconds to change to the Range Extender mode.
The router's LEDs are located on the front panel (View from left to right).
Name Status
Blinking
RE
Wi-Fi
Blinking
PWR
WAN On(Orange)
LAN
Blinking
WPS
TL-WR841HP
Indication
The router is connecting to the host network. This
process will last in the first 2 minutes.
The router has been successfully connected to the host
On
network, and it is working in Range Extender mode.
Off The wireless function is disabled.
On The wireless function is enabled.
The router is updating or initializing.
On The router is working in a normal status.
Off No connection.
The router's Internet port has been connected but the
Internet is unavailable.
On The Internet is available.
On There is a device connected to the corresponding port.
Off No connection.
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On network by WPS function. The WPS LED will be off
after 5 minutes.
300Mbps High Power Wireless N Router
-4-