Parental Control - TP-Link TL-WR841HP User Manual

that number in the box provided. Choose a number between 1 and 65534 but do not use
the number of any common service port.

Remote Management IP Address - This is the current address you will use when
accessing your router from the Internet. This function is disabled when the IP address is set
to the default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address.
If set to 255.255.255.255, then all the hosts can access the router from internet.

Note:
1. To access the router, you should type your router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your router's WAN address is 202.96.12.8, and the port number
used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked
for the router's password. After successfully entering the username and password, you will
be able to access the router's web-based utility.
2. Be sure to change the router's default password to a very secure password.

3.4.9 Parental Control

Go to "Advanced→Parental Control", and then you can configure the Parental Control in this
page. The Parental Control function can be used to control the internet activities of the child,
limit the child to access certain websites and restrict the time of surfing.

Parental Control - Check Enable if you want this function to take effect; otherwise, check
Disable.

MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC,
or you can make use of the Copy To Above button below.

MAC Address of Your PC - This field displays the MAC address of the PC that is
managing this router. If the MAC Address of your adapter is registered, you can click the
Copy To Above button to fill this address to the MAC Address of Parental PC field above.

Website Description - Description of the allowed website for the PC controlled.
TL-WR841HP 300Mbps High Power Wireless N Router
-60-