Guest Network; Dhcp - TP-Link TL-WR841HP User Manual


Run Time - The time this function is running.

Transmit - Wireless transmit rate information.

Receive - Wireless receive rate information.
Click the Start button to start wireless throughput monitor.
Click the Stop button to start wireless throughput monitor.

5.3.4 Guest Network

Choosing menu "Setting→Guest Network", you can configure the basic setting for guest
Network.

Allow Guests To Access My Local Network - Click ON/OFF to enable or disable this
feature. If enabled, guests can communicate with hosts.

Wireless - Click ON/OFF to enable or disable your Guest network. If enabled, the wireless
stations will be able to access the Router, otherwise, wireless stations will not be able to
access the Router.

Network Name(SSID) - Create a name (up to 32 characters) for your Guest network. The
same Name(SSID) must be assigned to all wireless devices in your Guest Network.

Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.

5.3.5 DHCP

There are three submenus under the DHCP menu: DHCP Settings, DHCP Client List and
Address Reservation. Click any of them, and you will be able to configure the corresponding
function.
TL-WR841HP 300Mbps High Power Wireless N Router
-143-