Wireless - TP-Link TL-WR841HP User Manual

Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP's IP

address or the domain name. If you choose static IP and enter the domain name, you
should also enter the DNS assigned by your ISP.
VPN Server IP/Domain Name - Enter the IP address or domain name of your VPN server.

Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
Click the Save button to save your settings.

Note:
If you don't know how to choose the appropriate connection type, click the Detect button to
allow the router to automatically search your Internet connection for servers and protocols. The
connection type will be reported when an active Internet service is successfully detected by the
router. This report is for your reference only. To make sure the connection type your ISP
provides, please refer to the ISP. The various types of Internet connections that the router can
detect are as follows:
 PPPoE - Connections which use PPPoE that requires a user name and password.
Dynamic IP - Connections which use dynamic IP address assignment.

Static IP - Connections which use static IP address assignment.

The router cannot detect PPTP and L2TP connections with your ISP. If your ISP uses one of
these protocols, then you must configure your connection manually.

3.3.3 Wireless

Choosing menu "Basic→Wireless", you can configure the basic settings for the wireless
network.
Wireless - Click ON/OFF to enable or disable your wireless network.

Network Name (SSID) - Create a name (up to 32 characters) for your wireless network. If

the Hide SSID checkbox is selected, the SSID of your wireless network will be hidden from
the Wi-Fi network.
Password - Create a password for your wireless network. The password must have a

minimum of 8 characters in length.
Click the Save button to save your settings.
TL-WR841HP 300Mbps High Power Wireless N Router
-21-