Advanced Security - TP-Link TL-WR840N User Manual

Chapter 4
• FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep
the default Enable.
• TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep
the default Enable.
• H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT,
keep the default
• RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable.
• SIP ALG - To allow some multimedia clients to communicate across NAT, click
Enable.
3. Click Save.
4. 9. 2.

Advanced Security

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Security > Advanced
ICMP-Flood, UDP Flood and TCP-SYN Flood.
• Packets Statistics Interval (5~60)
5 and 60 seconds from the drop-down list. The
indicates the time section of the packets statistics. The result of the statistics is used
for analysis by SYN Flood, UDP Flood and ICMP-Flood.
Enable.
Security, and you can protect the router from being attacked by
- The default value is 10. Select a value between
Packets Statistics Interval value
43