Table of Contents
Advertisement
Chapter 11
6 Check the
Routing Table
is set successfully.
Done!
Open a web browser on your PC. Enter the company server's IP address to visit the
company network.
11 6
Specify Wireless Settings
The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
router.
•
To enable or disable the wireless function:
1. Go to
Wireless
or
Advanced
2. The wireless function is enabled by default. If you want to disable the wireless function
of the router, just untick the
all the wireless settings will be invalid.
•
To change the wireless network name (SSID) and wireless password:
1. Go to
Wireless
or
Advanced
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are
effective. Please write down the new SSID and password for future use.
•
To hide SSID:
1. Go to
Wireless
or
Advanced
below. If you can find the entry you've set, the static routing
>
Wireless
>
Wireless
Enable
checkbox of each wireless network. In this case,
>
Wireless
>
Wireless
Network Name (SSID)
>
Wireless
>
Wireless
Customize Your Network Settings
Settings.
Settings.
and customize the password for the
Settings.
55
Advertisement
Table of Contents
