Table of Contents
Advertisement
Chapter 4
5. Scroll down the page, enable IPv6, and configure the IPv6 parameters.
•
Addressing
Type: Consult your ISP for the addressing type (DHCPv6 or SLAAC).
SLAAC is the most commonly used addressing type.
•
IPv6
Gateway: Keep the default setting as
Note: If your ISP has provided the IPv6 address, click
specified by ISP and enter the parameters provided by your ISP.
6. Click
OK
to make the settings effective. Now IPv6 service is available for your
network.
4. 5.
Wireless Router Mode
If you already have a modem or your internet comes via an Ethernet jack on the wall, you
can set up the modem router as a regular wireless router to share the internet.
1. Find the WAN port (labeled as LAN4/WAN) on the modem router, and connect it
to your existing modem or the Ethernet jack on the wall. Then connect the power
adapter and turn on the modem router. If you connect an existing modem, reboot it
to get the modem router connected to the internet.
2. Connect your computer to the modem router. For details, refer to
Modem
Router.
3. Visit http://tplinkmodem.net, and log in with the account you set for the modem
router.
4. Go to
Advanced
Save. The modem router will reboot.
5. Go to
Basic
> Internet, select the
provided by your ISP.
>
Operation
Mode, select the
Connection
Set Up Internet Connections
Current
Connection.
Advanced
to reveal more settings. Check to use IPv6
Wireless Router
Type, and enter the information
Connect Your
Mode, and click
15
Advertisement
Table of Contents
