Table of Contents
Advertisement
Error! AutoText entry not defined.
Chapter 2. Hardware Installation
2.1 The Front Panel
The LEDs locate on the front panel. They indicate the device's working status. For details, please
refer to Error! Reference source not found..
LED Explanation
Name
Status
On
Power
Off
On
Flash
ADSL
Off
On
Flash
Internet
Off
On
WLAN
Flash
Off
On
1,2,3,4 (LAN)
Flash
Off
On
Flash
QSS
Off
Error! AutoText entry not defined. User Guide
Figure 2-1
Indication
The modem router is powered on.
The modem router is off. Please ensure that the power adapter is
connected correctly.
ADSL line is synchronized and ready to use.
The ADSL negotiation is in progress.
ADSL synchronization fails. Please refer to
troubleshooting.
The network is available with a successful Internet connection.
There is data being transmitted or received via the Internet.
There is no successful Internet connection or the modem router is
operating in Bridge mode. Please refer to
troubleshooting.
Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the wireless
network.
Wireless function is disabled.
There is a device connected to this LAN port.
The modem router is sending or receiving data over this LAN
port.
There is no device connected to this LAN port.
A wireless device has been successfully added to the network by
QSS function.
QSS handshaking is in process and will continue for about 2
minutes. Please press the QSS button on other wireless devices
that you want to add to the network while the LED is flashing.
The QSS function is disabled or the wireless device fails to be
added to the network in 2 minutes after QSS function is enabled.
Please refer to
4.2.3.6 QSS
4
Note 1
for
Note 2
for
for more information.
Hide quick links:
Advertisement
Table of Contents
