Checking, Disassembling And Servicing; Checking And Adjusting - wsm Kubota L4100 Workshop Manual

L4100, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

Adjusting Brake Pedal Free Travel
CAUTION
• Stop the engine and remove the key, then chock the wheel
before checking brake pedals.
1. Release the parking brake.
2. Slightly depress the brake pedals and measure free travel "A"
at top of pedal stroke.
3. If the measurement is not within the factory specifications,
loosen the lock nut (1) and turn the turnbuckle (2) to adjust it
within the factory specifications.
Brake pedal free travel
Factory specification
"A"
IMPORTANT
• Keep the free travel in the right and left brake pedals equal.
NOTE
• The difference between the right and left pedal free travels
must be less than 5 mm (0.20 in.)
• After checking brake pedal free travel, be sure to engage
the parking brake lock fully and check to see that the brake
pedals are securely locked.
(1) Lock Nut
(2) Turnbuckle
Adjusting Parking Brake Lever
CAUTION
• Stop the engine and chock the wheels before checking
parking brake.
1. Raise the parking brake lever to the parking position while
counting the ratchet sound made by the parking brake lever.
2. If adjustment is needed, loosen the lock nut (2) and adjust the
parking brake cable (1) length with in acceptable limit.
3. Retighten the lock nut (2).
Proper parking brake lever free travel
(1) Parking Brake Cable
5-S4
BRAKES
15 to 20 mm
0.59 to 0.78 in.
A: Free Travel
9Y1210278BRS0013US0
1 notch (Ratchet sound 1)
(2) Lock Nut
9Y1210278GEG0025US0
KiSC issued 08, 2012 A
(EU)