wsm Kubota L4100 Workshop Manual page 181

L4100, WSM
Three Point Linkage and ROPS
1. Upper ROPS (1) with safety strap (2).
2. Remove check chains (8), top link (5), lift rods (6) and lower
links (7).
3. Remove the lower ROPS (4).
(When reassembling)
ROPS
mounting
screw
Tightening torque
ROPS fulcrum screw
(1) Upper ROPS
(2) Safety Strap
(3) ROPS Fulcrum Screw
(4) Lower ROPS
Rear Wheels and Seat
1. Place the disassembling stand under the clutch housing and
transmission case.
2. Loosen and remove the rear wheels mounting screws and nuts.
3. Remove the rear wheels.
4. Remove the seat (1).
Rear wheel mounting
screw and nut
Tightening torque
Rear wheel mounting stud
bolt
(1) Seat
Step and Center Cover
1. Disconnect foot accelerator rod (1).
2. Disconnect differential lock pedal (2).
3. Remove the mat (6), the step (5), 4WD grip (4) and center cover
(3).
(1) Foot Accelerator Rod
(2) Differential Lock Pedal
(3) Center Cover
3-S18
TRANSMISSION
167 to 196 N·m
M14 screw 17.0 to 20.0 kgf·m
123 to 144 lbf·ft
78 to 90 N·m
M12 screw 7.9 to 9.2 kgf·m
58 to 66 lbf·ft
118 to 137 N·m
12.0 to 14.0 kgf·m
86.8 to 101 lbf·ft
(5) Top Link
(6) Lift Rod
(7) Lower Link
(8) Check Chain
9Y1210278TRS0010US0
197 to 225 N·m
20.0 to 23.0 kgf·m
145 to 166 lbf·ft
98.1 to 112 N·m
10.0 to 11.5 kgf·m
72.4 to 83.1 lbf·ft
9Y1210278TRS0011US0
(4) 4WD Grip
(5) Step
(6) Mat
9Y1210278TRS0012US0
(EU)
KiSC issued 08, 2012 A