wsm Kubota L4100 Workshop Manual page 327

L4100, WSM
Range Gear Shift Lever (Shuttle Lever) Switch
1. Disconnect the 2P connector 1 (1) and the 2P connector 2 (5).
2. Connect the leads of the circuit tester to the 2P connector 1 (1)
and the connector 2 (5).
3. Set the range gear shift lever (shuttle lever) to "LOW",
"NEUTRAL" and "REVERSE" position as shown in the
pictures.
4. Measure the resistance between the 2P connector 1 (1) of the
switch 1 (2).
5. Measure the resistance between the 2P connector 2 (5) of the
switch 2 (4).
When lever is at NEUTRAL
position
Resistance (Across
When lever is at LOW
switch terminals)
(FORWARD) or REVERSE
position
(1) 2P Connector 1
(2) Switch 1
(3) Range Gear Shift Lever
(Shuttle Lever)
(4) Switch 2
(5) 2P Connector 2
N: Range Gear Shift Lever
(Shuttle Lever) Neutral Position
L: Range Gear Shift Lever
(Shuttle Lever) Low Speed
(Forward) Position
R Range Gear Shift Lever
(Shuttle Lever) Reverse Position
9-S10
ELECTRICAL SYSTEM
0 Ω
Infinity
[A] Checking Switch 2 When Setting
Range Gear Shift Lever
(Shuttle Lever) Neutral Position
[B] Checking Switch 2 When Setting
Range Gear Shift Low Speed
(Forward) Position
[C] Checking Switch 1 When Setting
Range Gear Shift Lever
(Shuttle Lever) Neutral Position
[D] Checking Switch 1 When Setting
Range Gear Shift Reverse
Position
9Y1210278ELS0031US0
KiSC issued 08, 2012 A
(EU)