Separating Clutch Housing From Mid Case - wsm Kubota L4100 Workshop Manual

L4100, WSM

(2) Separating Clutch Housing from Mid Case

Outer Components
1. Disconnect foot accelerator rod (3).
2. Remove brake rod R.H. (2) and L.H. (10).
3. Remove mounting bolts and steering support (1).
4. Remove clutch rod (4).
5. Remove fuse box (6) and ground cable (5).
6. Disconnect differential lock pedal (8).
7. Remove step (9) and wiring harness (7).
(1) Steering Support
(2) Brake Rod R.H.
(3) Foot Accelerator Rod
(4) Clutch Rod
(5) Ground Cable
Suction Pipe and Hydraulic Block
1. Remove suction pipe (1), (4).
2. Remove oil filter bracket (3) together with oil filter (8).
3. Remove hydraulic block (7) together with return pipe (6).
4. Remove 3P delivery pipe (2), I-PTO delivery pipe (5).
5. Remove the brake connecting rod (9). (R.H. and L.H.)
(When reassembling)
• Apply grease to the O-rings
Tightening torque 3P delivery pipe joint bolts
(1) Suction Pipe
(2) 3P delivery Pipe
(3) Oil Filter Bracket
(4) Suction Pipe
(5) I-PTO Delivery Pipe
3-S15
TRANSMISSION
(6) Fuse Box
(7) Wiring Harness
(8) Differential Lock Pedal
(9) Step
(10) Brake Rod L.H.
9Y1210278CLS0035US0
49 to 69 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
(6) Return Pipe
(7) Hydraulic Block
(8) Oil Filter
(9) Brake Connecting Rod
9Y1210278CLS0011US0
KiSC issued 08, 2012 A
(EU)