Check Points Of Every 50 Hours - wsm Kubota L4100 Workshop Manual

L4100, WSM

[3] CHECK POINTS OF EVERY 50 HOURS

Checking Engine Start System
CAUTION
To avoid personal injury:
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test do not operate the
tractor.
Preparation before testing
1. Place all control levers in the "NEUTRAL" position.
2. Set the parking brake and stop the engine.
Test 1: Switch for the range gear shift lever
1. Sit on the operator's seat.
2. Shift the PTO clutch control lever to "OFF" position.
3. Shift the range gear shift lever to "L", "H" or "R" position.
4. Depress the clutch pedal fully.
5. Turn the key to "START" position.
6. The engine must not crank.
7. If it cranks, consult your local KUBOTA Dealer for this service.
Test 2: Switch for the PTO clutch control lever
1. Sit on the operator's seat.
2. Shift the PTO clutch control lever to "ON" position.
3. Depress the clutch pedal fully.
4. Shift the range gear shift lever to the neutral position.
5. Turn the key to "START" position.
6. The engine must not crank.
(1) Clutch Pedal
(2) Range Gear Shift Lever
(3) PTO Clutch Control Lever
G-18
GENERAL
(4) Parking Brake Lever
(5) Operator's Seat
9Y1210278GEG0087US0
KiSC issued 08, 2012 A
(EU)