Mid Case - wsm Kubota L4100 Workshop Manual

L4100, WSM

(2) Mid Case

NOTE
• Refer to section 2. CLUTCH (See page 2-S12) for hydraulic PTO clutch.
PTO Clutch Valve, PTO Clutch Holder
1. Remove PTO clutch valve (1).
2. Remove PTO clutch holder (6) together with PTO clutch pack
(5).
3. Tap out 18T gear shaft (7).
4. Tap out 23T gear shaft (8).
(When reassembling)
• Apply a small amount of transmission fluid to the O-ring.
• Install oil pipe (2) to the side hole of PTO clutch holder (6) firmly.
PTO clutch valve mounting
screw
Tightening torque
PTO clutch holder
mounting screw
(1) PTO Clutch Valve
(2) Oil Pipe
(3) Jack Screw M8
(4) Mid Case
3-S25
TRANSMISSION
9Y1210278TRS0023US0
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
(5) PTO Clutch Pack
(6) PTO Clutch Holder
(7) 18T Gear Shaft
(8) 23T Gear Shaft
9Y1210278CLS0019US0
KiSC issued 08, 2012 A
(EU)