wsm Kubota L4100 Workshop Manual page 341

L4100, WSM
Rotor
1. Press out the rotor (1) from drive end frame (3).
IMPORTANT
• Take special care not to drop the rotor and damage the slip
ring or fan, etc..
(1) Rotor
(2) Block
Retainer Plate
1. Unscrew the four screws holding the retainer plate, and remove
the retainer plate (1).
(1) Retainer Plate
Bearing on Drive End Side
1. Press out the bearing from drive end frame (3) with a press and
jig (1).
(1) Jig
(2) Block
Bearing at Slip Ring Side
1. Lightly secure the rotor (1) with a vise to prevent damage, and
remove the bearing (2) with a puller (3).
(1) Rotor
(2) Bearing
9-S24
ELECTRICAL SYSTEM
(3) Drive End Frame
WSM000001ELS0029US0
WSM000001ELS0030US0
(3) Drive End Frame
WSM000001ELS0031US0
(3) Puller
WSM000001ELS0032US0
KiSC issued 08, 2012 A
(EU)