wsm Kubota L4100 Workshop Manual page 94

L4100, WSM
Wirings
1. Disconnect 1P battery connector (1) and remove slow blow fuse
boxes (3).
2. Disconnect 2P connector (4) to alternator and wings (5).
3. Disconnect 1P connector (8) to starter motor and B terminal (7).
4. Disconnect 1P connector (6) to engine oil pressure switch, then
set aside the wiring harness.
5. Disconnect the combination lamp connector (9)
Starter B terminal mounting
Tightening torque
nut
(1) 1P Connector (Battery)
(2) Flasher Unit Connector
(3) Slow Blow Fuse Box
(4) 2P Connector (Alternator)
(5) Wiring (Alternator)
Hydraulic Hoses
1. Disconnect the right delivery hose (3) and the left delivery hose
(4).
Main delivery hose
retaining nut
Tightening torque
Right and left delivery
hoses retaining nut
(1) Main Delivery Hose
(2) Return Hose
(3) Right Delivery Hose
(4) Left Delivery Hose
(5) Relief Valve Plug (Engine Side)
1-S22
ENGINE
7.9 to 9.8 N·m
0.80 to 1.0 kgf·m
5.8 to 7.2 lbf·ft
(6) 1P Connector (Engine Oil Pressure
Switch)
(7) B Terminal (Starter)
(8) 1P Connector (Starter Motor)
(9) Combination Lamp Connector
9Y1210278ENS0022US0
47 to 50 N·m
4.8 to 5.2 kgf·m
35 to 37 lbf·ft
25 to 29 N·m
2.5 to 3.0 kgf·m
18 to 21 lbf·ft
(A) Steering Controller Viewing from
the Bottom
9Y1210278ENS0122US0
KiSC issued 08, 2012 A
(EU)