Table of Contents
Advertisement
fm.book 76 ページ ２００４年７月１３日 火曜日 午後４時５５分
Output mode
Selects whether to print data sent from the computer, to store it in the storage or to store it as a form in the printer.
Settings
Direct print (initial setting)
Prints data immediately onto paper that is transmitted
from a computer.
Storage
Stores the output data in the printer. Data stored in the
storage can be printed repeatedly by selecting it on the
[Storage] tab of [Job manager] of RISO Console PS7R.
"Storage"
p.129
Change output condition
A registered output setting can be selected if [Output mode] is not set to
[Form]. Also the storage folder to which output data is stored can be
specified.
Click the [Change output condition] button to display the [Specify out-
put condition] screen.
Settings
Output setting
You can select whether to print according to the printer
driver setting or to print according to output setting reg-
istered in the printer.
When printing according to the printer driver setting,
select [Printer driver setting].
When printing according to setting registered in the
printer, select one of Direct 1 - Direct 9 (or any regis-
tered name that has been set).
Select the desired setting in the pull-down menu and
click the [OK] button.
The initial setting is [Printer driver setting].
• Register output setting to the printer in [Administra-
tor] of the Console.
"Direct Output Setting"
• If the printer is not connected to a network, "Con-
necting to Server..." is displayed.
76
p.151
Print & Storage
Performs direct printing and also stores the output data
in the printer (Storage).
Form
Stores the output data as a form in the printer. The stored
form can be selected on the [Forms] tab and be overlaid
on other output data for printing.
Output data created by overlay with a form cannot be
stored in the storage.
"Forms"
p.130
Storage folder name
Output data can be stored in any folder created in the
printer.
If [Print & Storage] or [Storage] is selected at [Output
mode] and folders are created in the printer, select one of
folder1 - folder9 (or any registered foldername that has
been set).
Select the desired folder in the pull-down menu and
click the [OK] button.
The initial setting is [Folder 0].
• Create folders in [Administrator] of the Console.
"Folder Setting "
p.153
• If the printer is not connected to a network, "Con-
necting to server..." is displayed.
Advertisement
Table of Contents
