12
. FRONT WHEEL/BRAKE/SUSPENSION
Movie S 125i
BOTTOM CONE RACE INSTALLATION
Drive new top and bottom ball races into the
steering head using the outer driver.
Apply grease to the top and bottom ball races
and install 26 steel balls on the top ball race and
19 steel balls on the bottom ball race.
Apply grease to the ball races and install the
front fork.
Apply grease to the top cone race and install it.
Tighten the top cone race and then turn the
steering stem right and left several times to make
steel balls contact each other closely.
Top Cone Race
Install the steering stem lock nut and tighten it
Long Socket wrench
while holding the top cone race.
Torque: 8.0~12.0 kg-m
Install the front wheel.
Long Socket wrench
F002
12-15