Bearing Replacement - KYMCO Agility City 125 Service Manual

Cortesia de / Courtesy of: www.batmotos.com
10
. FINAL REDUCTION
Check the left crankcase bearings for
excessive play and inspect the oil seal for
wear or damage.
Inspect the drive shaft and gear for wear or
damage.
Check the transmission case cover bearings
for excessive play and inspect the final shaft
bearing oil seal for wear or damage.
Do not remove the transmission case
cover except for necessary part replace-
ment. When replacing the drive shaft,
also replace the bearing and oil seal.

BEARING REPLACEMENT

(TRANSMISSION CASE COVER)
Remove the transmission case cover bearings
using a bearing puller.
Remove the final shaft oil seal.
Special
Bearing Puller
Drive new bearings into the transmission case
cover.
10-3
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Drive Shaft Bearing
Final Shaft Bearing
Drive Shaft Bearing
Countershaft Bearing
Bearing Puller
Outer Driver, 32x35mm
Countershaft Bearing
Oil Seal
Final Shaft Bearing