Settings For Other Alarm Parameters; Several Alarm Types Activated Simultaneously - Mitel 700 User Manual

Basic functions
The time setting for the pre-alarm is made for all the alarm types jointly and can also be made
using vibrator call.

SETTINGS FOR OTHER ALARM PARAMETERS

Alarm number
If the SOS emergency number is predefined by the system, this menu item is not displayed.
If you always store the SOS emergency number preceded by the R key feature (inquiry / hold),
the emergency call can also be made during a call (depending on the system / and handset –
see above). To enter the R key feature, press the # -key three times. See also
"Editors" on page 20.
Alarm auto answer
If activated, a call is answered automatically from any call number during the pre-alarm.
If the function is deactivated and an incoming or existing call is in progress during the pre-alarm,
the alarm call number is dialed at the end of the pre-alarm.
Regardless of the setting, calls from the alarm number or SOS emergency number are answered
automatically and the pre-alarm is terminated.
Alarm tone
The pre-alarm can be sounded with or without an alarm tone on the DECT phone. If the alarm
tone is activated, the signalling volume increases progressively.
Vibrator
Determines whether the pre-alarm is made with or without vibrator call (as of Release 4.01).
Repeat alarm
The amount of time after which a new pre-alarm is made followed by the dialing of the alarm call
number (for instance because the dialing of the alarm call number was cancelled by the system).
Hands-free in alarm
Specifies whether the alarm call can be made in hands-free or handset operation. This setting
also applies to the emergency call using the SOS / emergency call key.

SEVERAL ALARM TYPES ACTIVATED SIMULTANEOUSLY

Avoid simultaneously activating the three types of sensor alarm where very short delays and
repeats are set and where the pre-alarm may be deactivated. If there is simultaneous triggering
of the alarm call it may no longer be possible to access the menu (to deactivate an alarm type).
In this case, place the handset in the charger cradle and leave it there to make the setting changes.
31