PowerLogic EGX200 Instruction Bulletin page 46

Appendix B—Firmware Updates
You should receive the message "Connected to [IP address]," indicating you are
now in an "ftp" session.
5. At the User [150.200.250.50: (none)]: prompt, press Enter.
6. At the Password: prompt (Figure B–3), type the administrator password (admin is
the default password until the administrator changes it).
Figure B–3: Password prompt
7. At the ftp prompt (Figure B–4), type send [egx#####.bin], and press Enter to
initiate the ftp transfer. The filename you enter is case-sensitive.
NOTE: ##### refers to the EGX200 firmware version number.
Figure B–4: File transfer completed
8. When the download is complete (Figure B–4), the ftp prompt displays again. Type
quit and press Enter to exit the FTP session.
42
NOTE: The IP address 150.200.250.50 is used as an example only.
NOTE: The IP address 150.200.250.50 is used as an example only.
© 2001 Schneider Electric All Rights Reserved
63230-314-200/A2
8/2001