PowerLogic EGX200 Instruction Bulletin page 41

63230-314-200/A2
8/2001
Up to 10 concurrent users can be logged into the EGX200 at any given time, using any
combination of passwords. The administrator can configure the amount of time the
EGX200 waits during an inactivity period before "expiring" access (see "Advanced
Setup" on page 38).
During normal operations, we recommend that you return to the EGX200 home page
and select "Log Out" when finished interfacing with the EGX200; doing so immediately
releases that access privilege for another user.
The administrator can disable the password for any page. Disabling security for a page
allows users to bookmark the page for quick access without going through the Login
page.
Table 5–4 summarizes password accounts, default passwords, conventions, and
access levels.
Table 5–4: Password Administration Summary
Password Account Default Password
Administrator
User 1
User 2
User 3


Case-sensitive, alphabetic characters only
© 2001 Schneider Electric All Rights Reserved
Convention
admin 0–8 characters Full access to all passwords and pages
master 0–8 characters Choosing from the following options, the
engineer 0–8 characters
operator 0–8 characters
Chapter 5—Operation
EGX200 Embedded Web Page Options


Access
administrator assigns access levels for
these pages: Communication Settings,
Device List, and Diagnostics. Access
levels are as follows:
• None
• Read Only
• Full (same as Administrator access)
37