Nvram Test; Keypad Test; Display Test; Beeper Test - Bodyguard T-30 User Manual

6.2

NVRAM TEST

The NVRAM TEST allows you to verify if the NVRAM (non-volatile memory) chip is functioning
correctly. Note that the NVRAM test will not erase any USER ID information, CUSTOM or MEMORY
programs.
Once the NVRAM TEST has been selected the test will automatically begin and take about 30
seconds to complete. Once complete, the message: ''SUCCESSFUL'' will be displayed if the NVRAM
chip is functioning correctly.
6.3

KEYPAD TEST

The KEYPAD TEST (Code "d1" on a T-30) allows you to verify if each key on the console is
functioning correctly. During the test, when you press on a console key a confirmed response
labeling that key should appear on the screen. For example, if you press the INCREASE INCLINE
key, the screen should display INCLINE INC (or "1" on a T30). Test the various keys listed in the grid
below and ensure the correct response appears on the screen. Press the STOP key to exit the test.
The grid below shows the number, text or action that should display/occur when you press a key.
KEY
INCLINE INCREASE
INCLINE DECREASE
iTEK
COOL DOWN
STOP
JUSTGO
SPEED INCREASE
SPEED DECREASE
QUICK INCLINE KEYS
QUICK SPEED KEYS
USER ID
STATS
BASIC
CARDIO
ADVANCED
PRESET SPEED A
PRESET SPEED B
6.4

DISPLAY TEST

The DISPLAY TEST allows you to verify if each part of the LCD display is functioning correctly.
Once the DISPLAY TEST has been selected the test will begin. During the test, the screen will light
up in a certain pattern; check that all segments in the pattern are functioning correctly. Proceed to the
next pattern by pressing the INCREASE/DECREASE SPEED key until all patterns have been
completed and checked. Press the STOP key to end the test.
6.5

BEEPER TEST

The BEEPER TEST allows you to verify if the beeper in the console is functioning correctly.
Once the BEPPER TEST has been selected the test will automatically begin. A series of beeps
should be heard if everything is functioning correctly. Press any key to end the test.
T-30
1
2
3
4
EXITS TEST
6
7
8
-
-
-
-
-
-
-
-
-
44
TREADMILLS – USER MANUAL
T-45 & T-75
INCLINE INC
INCLINE DEC
ITEK
COOL DOWN (T-45 only)
EXITS TEST
JUSTGO/ENTER
SPEED INC
SPEED DEC
EG. INCLINE 9
EG. SPEED 2
USER ID
STATS
PROGRAM 1
PROGRAM 2
PROGRAM 3
KEY A
KEY B