Diagnostics Menu; Accessing The Diagnostics Menu - Bodyguard T-30 User Manual

6

DIAGNOSTICS MENU

The Diagnostics menu consists of a range of operational tests and stored usage data that can be
used to determine equipment performance as well as aid in the diagnosis of any equipment issues.
T-30 TREADMILL
CODE DIAGNOSTICS MENU
d1
d2
d3 Speed Sensor Test
d4
d5
d6
d7
n/a
6.1

ACCESSING THE DIAGNOSTICS MENU

To access the DIAGNOSTIC Menu and perform an operational test or view stored usage data
complete the following process:
• At the HOME SCREEN, press and hold the iTEK key for 3 seconds.
On a T-30 the central window will display "dIAG", the top left L.E.D. window will display the M.C.B.
software version (e.g. "43") and the top right L.E.D. window will display the console software
version (e.g."0.32").
On a T-45 & T-75, "DIAGNOSTICS MENU" will appear on the screen and "PRESS ENTER". If
you wait for 3 seconds then the console and lower board software versions will scroll across the
alphanumeric screen.
• Scroll through the Diagnostics menu with the INCREASE/DECREASE SPEED keys until you find
the test/category you wish to access.
• Press the ENTER key to begin that test or to view that category's data.
• If applicable, use the INCREASE/DECREASE SPEED keys to modify selections/settings.
• Press the ENTER key to confirm any settings changes.
• Press the STOP key to return to the DIAGNOSTICS Menu.
• Use the INCREASE/DECREASE SPEED to scroll to another test/category or if you are finished
press the STOP key again (or the iTEK key) to return to the HOME SCREEN.
Keypad Test
Current Test
Error Log
Statistics
Maintenance
ESC Test
Incline Calibration
SECTION DIAGNOSTICS MENU
6.3
6.11
6.13
6.14
6.16
6.15
6.12
6.9
Speed Sensor Test
Extreme Amperage
43
TREADMILLS – USER MANUAL
T45-75 TREADMILL
NVRAM Test
Keypad Test
Display Test
Beeper Test
Heart Rate Test
Safety Key Test
Belt Alignment
Incline Calibration
Motor Check
Current Test
ESC Test
Error Log
Maintenance
Statistics
USB Test
SECTION
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
6.17
6.18