Console Features - Bodyguard T-30 User Manual

3.7

CONSOLE FEATURES

ALPHANUMERIC MESSAGE CENTER
Situated below the profile the 16-character alphanumeric message center shows menu information,
workout parameters during and after a workout as well as maintenance and error data when
necessary.
BLUETOOTH ON/OFF (optional on T-45 & T-75)
When at the HOME SCREEN on compatible products the INCREASE INCLINE key acts a Bluetooth
Connecting Toggle Switch. Pressing it once will turn the Bluetooth Connecting Feature on
(BLUETOOTH ON displays on screen) at which point it will search for a device to connect or pair with
before automatically turning off after 30 seconds (BLUETOOTH OFF displays on screen). Pressing
the INCREASE INCLINE key a second time before the 30 seconds has passed will turn the Bluetooth
Connecting feature off.
COOL DOWN KEY (T-30 & T-45 only)
Press this key to begin a cool-down period on compatible programs. (see section 5.9)
INCREASE/DECREASE INCLINE KEYS
Pressing these keys allows you to modify the angle of the walking belt during the exercise. If you
continuously hold down a key, the incline display will gradually change (0.5% at a time). Release the
key when you have selected your desired exercise incline. The incline of the treadmill will slowly
change. On the display, the desired incline will flash until it has been attained. These keys also allow
you to select the parameters prior to each exercise and act as scrolling keys in various menus. THE
INCREASE INCLINE key also toggles the BLUETOOTH Transmission ON/OFF when at the HOME
SCREEN.
INCREASE/DECREASE SPEED KEYS
Pressing these keys allows you to modify the speed of the walking belt during the exercise. If you
continuously hold down a key, the speed display will gradually change (0.1 km/h or 0.1 mph at a
time). Release the key when you have selected your desired exercise speed. The treadmill belt will
slowly change to reach the speed you want. On the display, the desired speed will flash until it has
been attained. These keys also allow you to select the programs and parameters prior to each
exercise and act as scrolling keys in various menus.
iTEK (HOME) KEY
This key has different functions depending on the unit and operational stage of the equipment.
On all models, when at the HOME SCREEN;
Press the iTEK key once to access the SETTINGS MENU (see section 5.1).
Press and hold the iTEK key for 3 seconds to access the DIAGNOSTICS MENU (see section 6.1)
On a T-45 & T-75, when in a general menu;
Pressing the iTEK key acts as a Home Key and cancels all data and returns to the HOME SCREEN.
On a T-45 & T-75, during a workout;
Press the iTEK key to scroll through various equipment performance statistics.
CURRENT (XX.X): Shows the current (DC amps) at the drive motor.
•
AVERAGE CURRENT (XX.X): Shows the rolling average current (DC amps) at the drive
•
motor over the previous hours of operation based on an algorithm.
TOTAL DISTANCE (XXX.X): Like an odometer in a car, it shows the total distance (miles/km)
•
covered by the treadmill prior to the current workout. Note, this data is stored on a memory
chip on the upper board so if the upper board is changed the numbers will be reset.
TOTAL TIME (XX MONTHS, XX DAYS, XX HOURS, XX MINUTES, XX SECONDS): Shows
•
the total time of use of the treadmill prior to the current workout. This is used to calculate
average use per day statistics for commercial warranty purposes. Note, this data is stored on
a memory chip on the upper board so if the upper board is changed the numbers will be reset.
TREADMILLS – USER MANUAL
19