Default User Weight - Bodyguard T-30 User Manual

by default and will not appear in the ADVANCED PROGRAMS list until it has been ACTIVATED via
the SETTINGS menu. Once activated the TURBO TRAINING program will be available in the
program list for users to select.
5.20

DEFAULT USER WEIGHT

The Default User Weight allows users of a T-30 to modify the default user weight value that appears
during program setup. The factory default value that appears is 150lbs (68kg) and a user must then
adjust the weight before each program to their actual weight if they would like a more accurate caloric
expenditure reading. However, if a user does not want to always adjust this setting each time they
can change the default user weight value to their actual weight so little or no fine-tuning is required
before each workout. Only one Default User Weight value may be stored in each T-30 display.
To modify the weight value:
Enter the SETTINGS menu and scroll until S2 appears in the bottom left L.E.D. window. The
•
current default weight will be displayed in the bottom right L.E.D. window.
Press ENTER and the default weight will begin flashing. Be sure to know if the value is in
•
Metric (kilograms) or Imperial (pounds) format (see S1 in section 5.3).
Using the INCREASE/DECREASE SPEED keys, select the desired default user weight value
•
and press the ENTER key to confirm.
TREADMILLS – USER MANUAL
42