Select Base Unit Location - Avaya 3810 Installation And Use Manual

Installation and Use

Select Base Unit Location

• Select a location that is not subject to excessive heat or humidity.
• Determine if the base unit will sit on your desk or be wall mounted.
• Place the base unit near a standard 120VAC outlet and within reach of a
telephone jack that is connected to the communications system. Avoid a
location that is surrounded by metal surfaces.
!
!
WARNING:
If the base unit is installed in a separate building from the
communications system, you must install In-Range Out of
Building (IROB) protectors. The IROB used with the Avaya 3810
Wireless Telephone is Module 146E (IROB Two) Dual IROB. To
order an IROB, contact your local Authorized Dealer.
• Place the base unit away from any electrical component, such as PCs,
monitors, and other telephones.
• If more than one base unit is being installed, each base unit must be placed
at least 5 feet apart.
• Keep the base unit and handset away from sources of electrical noise, such
as motors and fluorescent lighting.
2 Installing the Telephone
Select Base Unit Location 11