Toshiba T200 User Manual page 98

(c) Remove the Diagnostics Disk from the FDD, insert the source disk, and tap
Enter or press any key. The following message indicates the program has
started.
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = XX
Copy start
Insert target disk into drive A:
Tap Enter key when ready.
(d) Remove the source disk from the FDD, insert a formatted work disk, and tap
Enter or press any key. The [[ track, head = XXX X ]] message will appear
and copying to the target disk will begin. If data cannot all be copied in one
operation, the message from step (b) is displayed again. After the floppy
disk has been copied, the following message will appear:
Copy complete
Another copy (1:Yes/2:No) ?
To copy another disk, type 1 and the message from step (a) will be displayed
(e)
again. Enter 2 to return to the DIAGNOSTIC MENU.
4. DUMP program
(a) Select dump to display the following message:
DIAGNOSTICS-HARD
Drive type select (1:FDD, 2:HDD) ?
Select a format type number. If 2 is selected, the display will go to step (e).
(b)
Select FDD number (1:A, 2:B) ?
(c) Select a drive number and the following message will be displayed:
Format type select (0:2DD, 1:2D, 2:2HD) ?
(d) Select a media type number and the following message will appear:
Insert source disk into drive A:
Press Enter key when ready.
3-48
= XXX
= X
[[ track, head
DISK & FLOPPY DISK DUMP : VX.XX
= XXX X ]]
T200, T200CS