4.9
T200CS Lower System Board
Removing the T200CS Lower System Board
To remove the T200CS's lower system board, follow the steps below and refer to Figures 4-14
and 4-15.
1.
Turn off the power to the computer. Disconnect the AC adapter, power cord and
all external cables connected to the computer.
2.
Remove the battery pack, optional memory card, optional PCMCIA cards, HDD,
back cover, upper system board, backup battery, and RTC battery as described in
sections 4.2, 4.3, 4.4, 4.5, 4.6 and 4.7.
3.
Remove the black insulator, then disconnect the display cable from PJ405 (Figure 4-
14).
4.
Peel back the white tape, then remove the three M2.5x4 screws securing the lower
system board (Figure 4-14).
Figure 4-14 Removing the T200CS Lower System Board
4-22
T200, T200CS