Toshiba T200 User Manual page 106

When the PC Card Slot 1 option is set to Others, the Power option is displayed
in the sub-window. The Power option indicates the setting in CMOS.
(c) PC Card Slot 2
Use this option to select PC Card slot usage:
Printer
Others
When Others is chosen, use the sub-window shown below to control the modem
COM Port and power.
Use the COM Port option to select the interrupt (IRQ)/COM level for the
Toshiba card modem: COM 1 or COM2 (default).
Use the Power option to turn the power to the modem on or off.
When the PC Card Slot 1 option is set to Others, the Power option is dis-
played in the sub-window. The Power option indicates the setting in CMOS.
(d) Printer Port Type
This option sets the communication mode for the printer port to either
output-only or bi-directional. For most printers, the port should be set to
Output. With some other parallel devices, the setting should be Bi-direc-
tional.
Output
Bi-directional
4. Hard Disk
This option enables or disables the HDD.
80 MB
No Drive
3-56
Choose this selection when a PCMCIA card is installed.
(This isthe default.)
Choose this selection when a Toshiba card modem
is installed.
COM Port = COM2 (IRQ3/2F8H)
Power = On
Activates uni-directional operation.
(This is the default)
Activates bi-directional operation.
The hard disk can be accessed. Disk capacity is automatically
displayed and cannot be changed.
The hard disk cannot be accessed.
T200, T200CS