Installing the T200 Lower System Board
To install the T200's lower system board, follow the steps below and refer to Figures 4-12 and 4-
13.
1.
Connect the tablet cable to PJ407 (Figure 4-13).
2.
Connect the display cable to PJ404 and carefully rotate the system board (Figure 4-
13).
3.
Place the lower system board on the base frame (Figure 4-12).
4.
Secure the three M2.5x4 screws on the lower system board (Figure 4-12), then
replace the insulator.
5.
Install the upper system board, backup battery, RTC battery, back cover, HDD,
optional PCMCIA card, optional memory card, and battery pack as described in
sections 4.2, 4.3, 4.4, 4.5 4.6 and 4.7.
T200, T200CS
4-21