The Diagnostic Test - Toshiba T200 User Manual

3.1

The Diagnostic Test

This chapter explains how to use the T200/T200CS's Diagnostic Test program to test hard-
ware module functions. The Diagnostics Test Program is stored on the Diagnostic Disk. The
Diagnostic Test consists of 20 programs grouped into the Service Program Module (DIAG-
NOSTICS MENU) and Test Program Module (DIAGNOSTIC TESTS).
The DIAGNOSTICS MENU consists of the following eight functions:
DIAGNOSTIC TEST
HARD DISK FORMAT
HEAD CLEANING
LOG UTILITIES
RUNNING TEST
FDD UTILITIES
SYSTEM CONFIGURATION
SETUP
The DIAGNOSTIC TESTS menu contains the following twelve functional tests:
SYSTEM TEST
MEMORY TEST
KEYBOARD TEST
DISPLAY TEST
FLOPPY DISK TEST
PRINTER TEST
ASYNC TEST
HARD DISK TEST
REAL TIMER TEST
PCMCIA TEST
TABLET TEST
NDP TEST
The following equipment is needed to perform some test programs.
T200/T200CS Diagnostics Disk (all tests)
Optional external 3.5-inch FDD
Formatted working disk for the floppy disk drive test
Cleaning kit to clean floppy disk drive heads (Head Cleaning)
Printer wraparound connector for the printer wraparound (Printer) test
RS-232C wraparound connector for the RS-232C port wraparound (ASYNC) test
Parallel cable for the printer wraparound (Printer) test
External PS/2 type keyboard (Keyboard test)
PCMCIA wraparound connector for the I/O card (PCMCIA) test
Stylus
The following sections detail DIAGNOSTIC TESTS menu tests. Refer to sections 3.18
through 3.24 for detailed information on the other Service Program Module functions.
T200, T200CS
3-1