Toshiba T200 User Manual page 143

4.13 T200 Display Module
Removing the T200 Display Module
To remove the T200's display module, follow the steps below and refer to Figure 4-23.
1. Turn off the power to the computer. Disconnect the AC adapter, and all external cables
connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA cards, HDD,
back cover, upper system board, backup battery, RTC battery, lower system board,
FL inverter board, and tablet as described in sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8,
4.10 and 4.11.
3. Remove the display module from the display mask (Figure 4-23).
Installing the T200 Display Module
To install the T200's display module, follow the steps below and refer to Figure 4-23.
1. Place the display module on the display mask (Figure 4-23).
2. Install the tablet, FL inverter board, lower system board, upper system board, backup
battery, RTC battery, back cover, HDD, optional PCMCIA card, optional memory
card, and battery pack as described in sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.10,
and 4.11.
T200, T200CS
Figure 4-23 Removing the T200 Display Module
4-33