Accessing The Setup Program - Toshiba T200 User Manual

3.24.2

Accessing the SETUP Program

Select 0 from the DIAGNOSTICS MENU and tap or press Enter to display the following:
MEMORY
Total
Base
Extended
Shadow BIOS ROM
DISPLAY
Display Adapter
LCD Display Mode
LCD Gray Scale Level
Power On Display
COM/PCMCIA/PRT
Serial Port
PC Card Slot 1
PC Card Slot 2
Printer Port Type
HARD DISK
Capacity
↑ ↓ ← →
:Select items
Space, BkSp:Change values
NOTE: The LCD Gray Scale Level does not appear on the T200CS screen.
Moving Within the SETUP Menu and Changing Values
Tap or press ← and → to move between columns. Tap or press ↑ and ↓ to move
1.
between items in a column.
2. Tap or press the spacebar or BkSp to change the value.
Accepting Changes and Exiting the SETUP Window
1. Tap or press End to accept the changes made.
If the changed item does not require a system re-boot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires a system re-boot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to re-boot.
The system re-boots.
3-52
T200 SETUP
= 4096 KB
= 640 KB
= 3328 KB
= 128 KB
= VGA compatible
= Color
= Normal 16 Levels
= Internal/External
= COM1(IRQ4/3F8H)
= PCMCIA
= PCMCIA
= Output
= **MB
Home:Set default values
Esc:Exit without saving
End:Save changes and Exit
BIOS version = x.xx
BATTERY
Battery Save Mode = Full Power
Remaining Capacity = E
PASSWORD
Not Registered
OTHERS
Power-up Mode = Boot
CPU Cache = Enabled
Processing Speed = High
Speaker = On
Alarm Power On = Disabled
Boot Priority = FDD
PLEASE TAP BELOW
←
Space
F
→
HDD
↑
HOME
↓ →
ESC
BkSp END
T200, T200CS