Toshiba T200 User Manual page 144

4.14 T200CS Display Module
Removing the T200CS Display Module
To remove the T200CS's display module, follow the steps below.
1. Turn off the power to the computer. Disconnect the AC adapter, and all external
cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA cards, HDD,
back cover, upper system board, backup battery, RTC battery, lower system board,
FL inverter board, and tablet as described in sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8,
4.10 and 4.11.
3. Disconnect the display cable from the display module.
Installing the T200CS Display Module
To install the T200CS's display module, follow the steps below.
1. Connect the display cable to the display module.
2. Install the tablet, FL inverter board, lower system board, upper system board, backup
battery, RTC battery, back cover, HDD, optional PCMCIA card, optional memory
card, and battery pack as described in sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9,
4.10 and 4.11.
4-34
T200, T200CS