5.
Battery
(a)
Battery Save Mode
This option is used to select Full Power, Low Power, or User Setting
of the BATTERY SAVE OPTION.
Full Power
Low Power
NOTE: The System Auto Off message does not appear in boot mode.
User Setting
(b)
Remaining Capacity
To indicate approximately how much power is left in the battery pack, a horizon-
tal bar graph between "E" and "F" represents the amount of charge.
E
F
??? Remaining charge is unknown because the battery has been removed
N/A Battery pack is not installed.
T200, T200CS
The following shows full power settings.
CPU Sleep Mode
Display Auto Off =
HDD Auto Off
System Auto Off
LCD Brightness
The following shows low power settings.
CPU Sleep Mode
Display Auto Off =
HDD Auto Off
System Auto Off
LCD Brightness
Use this option to set battery save parameters on the sub-
window, BATTERY SAVE OPTIONS. If selected, the
automatic setting feature (Long Life or Normal Life) is
disabled and the user-preferred parameters become effec-
tive. The default setting in the sub-windows depends on the
Battery Save Mode: Full Power or Low Power. For details,
see Battery Save Options later in this section.
Empty
Full
and replaced.
=
Disabled
Disabled (T200)
30 Min.(T200CS)
=
Disabled
=
Disabled
=
Bright
=
Enabled
03 Min.
=
03 Min.
=
30 Min. (Auto Re -
sume Mode)
Disabled (Boot
Mode)
=
Semi-bright
3-57