Toshiba T200 User Manual page 48

Procedure 4 Connector Check
The display system has an LCD panel, FL unit, tablet, and FL inverter board. These compo-
nents are connected to the system board.
Disassemble the display unit and check the cable connections shown in Figures 2-3 and 2-4.
Refer to Chapter 4, Replacement Procedures, for more information about how to disassemble
the computer.
If any of these cables is not connected, firmly re-connect it and repeat Procedures 1, 2, and 3.
If the problem still exists, perform Procedure 5.
Figure 2-3 T200 Display Connection
Figure 2-4 T200CS Display Connection
2-28
T200/T200CS