Installing the FL inverter Board
To install the computer's FL inverter board, follow the steps below and refer to Figure 4-16.
NOTE: The T200 and T200 CS FL inverter boards are different. Check the part
number before installing the new FL inverter board.
T200 FL inverter board:
T200 CS FL inverter board:
1.
Connect the FL inverter cable to CN1 on the FL inverter board and the FL cable
to CN2 (Figure 4-16).
2.
Replace the FL inverter board and secure it with the three M2.5x4 screws (Figure
4-16).
3.
Install the lower system board, upper system board, backup battery, RTC battery,
back cover, HDD, optional PCMCIA card, optional memory card, and battery pack as
described in sections 4.2, 4.3, 4.4, 4.5, 4.6 and 4.7.
4-26
P000196850
P000195520
T200, T200CS