Toshiba T200 User Manual page 146

4.16 T200CS FL
Removing the T200CS FL
To remove the T200CS's FL, follow the steps below and refer to Figures 4-25 through 4-27.
1. Turn off the power to the computer. Disconnect the AC adapter, and all external cables
connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA cards, HDD,
back cover, upper system board, backup battery, RTC battery, lower system board,
FL inverter board, and tablet as described in sections 4.2 through 4.7, 4.9, 4.10 and
4.12.
3. Remove the four M2.5x4 screws securing the FL unit and LCD panel to the LCD
cover (Figure 4-25).
4. Remove the six M2x2 flat screws securing the FL unit cover (Figure 4-26).
4-36
Figure 4-25 Removing the Four Screws
Figure 4-26 Removing the FL Unit Cover
T200, T200CS