Sekonic SR-6500 HYBRID Operating Manual page 96

Setting menu Setting item
Feed Test 1
Feed Test 2
Test Mode
Print Test
Printer jet test
*1 Items displayed when SR-6500 mode is selected as the operating mode.
*2 Items displayed when SR-9000 mode is selected as the operating mode.
*3 Maximum number of columns to read differs depending on device sensor pitch.
*4 Data in parenthesis will appear according to options installed in the device.
*5 Factory default values differs depending on device sensor pitch.
1/6 inch:Direct under type 0.2,0.25,0.3 inch:Top-end timing control type 0.3F inch:"FACOM" type
indicates factory default values.
Setting value
Start , Stop
Start , Stop
Start , Stop
Start
List of menu modes
*1 *2
O O
O O
O O
O O
-95-