Sekonic SR-6500 HYBRID Operating Manual page 100

(2) Transmission errors
Error
Command error
Parameter error
Protocol error
(3) Cover open errors
Error
Cover open
Stacker unit cover open
* When the cover is closed, errors and warnings other than hardware
errors will be cancelled.
(4) Jam errors
[Main body unit]
Error
No feed
Jam at paper-feeding
detection sensor
Jam at reading start
detection sensor
Jam at main body unit
paper discharge
detection sensor
Error displays and countermeasures
Explanation Code
A non-specified command code
F5
was received.
A non-specified parameter was
F6
received.
While processing a command,
F7
another command was received.
Explanation Code
The cover of the main body unit
G1
is open
Front door of the stacker unit is
G2
open.
Explanation Code
Paper is not feeding though
H1
paper-feeding operation has
started.
A paper jam occurred at the
H2
paper-feeding detection sensor.
A paper jam occurred at the
H3
reading start detection sensor.
A paper jam occurred at the
H4
main body unit paper discharge
detection sensor.
Procedures for Resolving and Clearing Errors
• Press the CLEAR switch
(or execute the clear error command).
• C h e c k t o m a k e s u re t h a t
the USB cable is connected
properly.
• Check the details of the host
application program.
• Check the details of the controller
for the relevant application.
Procedures for Resolving and Clearing Errors
Make sure to firmly and securely
close the top cover on the device.
Make sure that the front door on the
stacker unit is firmly and securely
closed.
Procedures for Resolving and Clearing Errors
• Reset paper.
• Press the CLEAR switch
(or execute the clear error command).
• Clean the rollers.
• Remove any sheets that have
become jammed or sheets
inside the device.
• Press the CLEAR switch
(or execute the clear error command).
• Resolve) Clean the rollers.
• Check to make sure there
are no foreign objects within
the machine and remove as
necessary
-99-