Sekonic SR-6500 HYBRID Operating Manual page 28

Note)
1) The aligning roller is fixed with the magnet.Check that there is not
a gap and a floating on the adsorption aspect. In case of a certain
pressing the panel side, make stick.
2) Because the aliging roller section has used the magnet, do not bring
close a floppy disk and magnetic card etc...
Aligning roller
3.
Use the index markings on the side guide to determine how many sheets
maximum should be placed on the paper feed table. Errors may occur if too many
sheets are placed on the table.
Operation ■ Loading paper
index markings
Side guide
-27-