Standby Duration - Sekonic SR-6500 HYBRID Operating Manual

■ Standby duration

1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The flashing "
6.
Keep pressing the
or press the
Note)
(1) Releasing Sleep/Standby mode
Sleep/Standby mode will be cancelled in the following conditions.
• When an operation is entered on the panel screen.
• When a descending command is sent.
• When an error occurs.
• When loading paper on the hopper.
(2) Conditions in which Sleep/Standby mode cannot be attained
Sleep/Standby mode is not available in the following conditions.
• When displaying a menu on the panel screen.
• When an error occurs.
(3) Stacker cover open error cannot be detected in Standby mode.
Low power consumption settings ■ Standby duration
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Time for Standby] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Time for Standby
setting values
• None
• 1 - 60 (Minutes)
*Can be set in minute
increments.
-59-